How to take a meter reading

1. Press A to get up the display.
2. Proceed to press A to cycle via the totally different choices till you see Whole Energetic Import.
3. When you get to this feature, you need to have the ability to see your electrical energy studying.

1. Press the B button to wake the display up.
2. After the display lights up, press the B button a number of instances till you see a message that begins with both Whole or TOU.
3. Press the A button a number of instances till you see Whole Energetic Export – this display will present your export studying in kWh.

1. Press B to gentle the display up. Try to be given the choice for a meter increase.
2. Press A to pick out No after which you need to have the ability to see your electrical energy studying.

1. The display will begin exhibiting your first (R01) studying
2. Press B to gentle up the display
3. Maintain B for 5-10 seconds.
4. Press A to maneuver to your second R02 studying
5. Press A once more to maneuver again to R01
6. To see R02 once more, maintain B, then press A to swap between the reads once more

Your Landis + Gyr sensible meter can have both:

1. Two equal sized inexperienced A and gray B buttons, to the fitting of the display
2. An even bigger inexperienced A button to the fitting of the display, and a smaller black B button beneath the display

In case your meter has equal sized A and B buttons:

1. Press the A button to get to the display that claims Credit score mode bal.
2. Press and maintain the A button for round 2 seconds, till the display reveals the time.
3. Press the A button a number of extra instances to cycle via the meter’s screens till you see your Whole Act Export studying in kWh.

In case your meter has a bigger inexperienced A button and a smaller black B button:

• Press and maintain the A button till the time seems. 
• Press the A button a number of extra instances to cycle via the meter’s screens till you see your Whole Act Export studying in kWh.

1. Press both A or B to get up the display.
2. This could routinely give you your fuel studying.

1. First find the 2 gray buttons on the fitting aspect of the show.
2. Press the highest button A to get up the show backlight and show the Basic menu
3. Push the underside button B to scroll via menu choices: Basic, then Enhance, after which Registers menu shall be displayed
4. Choose the Registers menu by urgent button A
5. Push button B to scroll via menu choices: Cumulative then Charges in Use after which Charges 1-48 menus shall be displayed
6. Choose the Charges 1-48 menu by urgent button A
7. Use the push button B to scroll via menu choices: Imp. R1 and choose by urgent button A. That is your single charge meter studying

1. Press the highest button A to get up the show backlight and show the Basic menu
2. Push the underside button B to scroll via menu choices: Basic, then Enhance, after which Registers menu shall be displayed
3. Choose the Registers menu by urgent button A
4. Push button B to scroll via menu choices: Cumulative, then Charges in Use, after which Charges 1-48 menus shall be displayed
5. Choose the Charges 1-48 menu by urgent button A
6. Use the push button B to scroll via menu choices: Imp. R1 then Imp. R2 and choose by urgent button A. That is your two charge meter studying

1. Press the highest button A to get up the show backlight and show the Basic menu
2. Push the underside button B to scroll via menu choices: Basic, then Enhance, after which Registers menu shall be displayed
3. Choose the Registers menu by urgent button A
4. Push button B to scroll via menu choices: Cumulative
5. Choose the Cumulative menu by urgent button A. It ought to present your Import
6. Push button B to scroll via menu choices till you see Export in kWh. This Cum. Exp. determine is your photo voltaic export studying

The studying shall be on the display, if the show has gone to sleep mode, press any button to get the studying which shall be proven on the show.

Your EDMI SMETS2 electrical energy meter ought to auto-display your meter studying on the primary display (It is going to revert again to this display if you don’t press any buttons after 1 minute).

1. Maintain OK till it enters the Predominant Menu, you will note Billing seem
2. Maintain OK to enter the Billing sub-menu
3. Utilizing the arrows, scroll to Superior (2 pushes of the > button)
4. Maintain OK to enter the Superior’ sub-menu, you will note TOUmtrx seem
5. Maintain OK to enter the TOUmatrx sub-menu, you will note RATE1 seem
6. Use the arrows to cycle the charges you must submit (Fee 1, Fee 2, …)

Your EDMI fuel meter ought to auto-display your meter readings. If the display has gone to sleep:

1. Press the button on the fitting to get up the meter display.
2. It’s best to see the phrases Consumption in M³ and a quantity which is your meter studying.
3. The show will routinely cycle via different screens, however this primary one is your studying.

1. Press the highest button (K1) to enter the menu system.
2. With the arrow subsequent to Basic Show, press and maintain the highest button (K1).
3. Then press the underside button (K2) to scroll all the way down to Tariff Matrix. With the arrow subsequent to Tariff Matrix, press and maintain the highest button (K1).
4. With the arrow subsequent to TOU Register, press and maintain the highest button (K1).
5. T01 reveals the entire for R1, T02 reveals the entire for R2. T03 and 4 reveals the unused Fee band.

• Your meter will routinely change between 4 totally different screens – you don’t have to push any buttons.
• Your export studying is on the display that reveals ‘-A price’ in kWh.

1. When studying your Flonidan sensible fuel meter, your meter studying ought to be displayed routinely on the default display.
2. It ought to be a quantity preceded by a big V and adopted by m3 In case you have cycled off that display.
3. You need to use the left and centre push buttons beneath the display to cycle again to it.

1. Press the right-hand aspect button twice in fast succession to entry the handbook scroll sequence. 
2. Home windows 02 shows the meter studying 

1. Press 6 on the keypad.
2. You may see the letters IMP R01 seem on the display.
3. Wait a second – then eight digits will seem, adopted by “kWh” in direction of the underside proper of the display.
4. Take the primary 7 digits – that is your studying.

1. Press 6 on the keypad 4 instances.
2. Wait a second – your day/peak and evening/ off-peak readings will present up on the display one after the opposite, beginning with off-peak.
3. On your off-peak studying, you will see IMP R01 onscreen. A second later, you will see your meter studying: eight digits, with “kWh” in direction of the underside proper of the display.
4. On your peak studying, you will see IMP R02. A second later, you will see eight digits, with “kWh” in direction of the underside proper of the display. You may solely have to take the primary 7 digits when taking every of those readings (i.e. nothing after the decimal place).

1. Press 9 on the keypad.
2. The phrase VOLUME will present on the display.
3. Your fuel studying, in cubic metres (m3) will seem.
4. Take the primary 5 digits as your studying.

1. Press the A button.
2. Carry on urgent this till you get to TOTAL ACT IMPORT.
3. The quantity proven beneath that is your meter studying.

1. Press and maintain the inexperienced A button for a minimum of 2 seconds.
2. Press A many times to cycle via the shows.
3. The primary row of numbers you will see is your meter studying

1. Press the center button.
2. The quantity proven beneath “IMP” is your meter studying.

1. Press the orange button.
2. You may see a row of numbers adopted by “KWH”, that is your studying.

1. Press the Show or Show Choose button.
2. Maintain urgent till it scrolls via a quantity adopted by kWh, that is your studying.

Write down the 5 numbers as they seem. Ignore the pink one.

1. The cheaper one is on high
2. Write down the 5 numbers as they seem, ignoring the pink ones.

1. Write down the numbers as they seem.
2. Press the button to see the following studying, then write that down too.

1. Write down the numbers the pointer has simply handed, from left to proper.
2. If the pointer lies precisely on any quantity, underline it (within the above instance, you’ll underline the 4).
3. Now, take a look at your 5 numbers. For any which are underlined, take a look at the quantity following it – if it’s between 9 and 0, cut back your underlined quantity by one. The above instance would due to this fact be 1 3 9 7 0.

Write down the primary 4 numbers as they seem. Ignore the pink ones.

Write down the primary 5 numbers as they seem – ignore the numbers after the decimal level (typically in pink).

Write down the numbers closest to the pointer, as they seem. If it’s between numbers, put the decrease quantity, but when it’s between 9 and 0, write 9.